Saturday, December 25, 2010

Color Hot Pink Template

A description of the hammer-making process from 1844!

Only the head of the establishment was usually entrusted to hold the hammer with the skin, because every piece of skin had different mechanical properties, porosity ETC. Graf
Petzold and owe much of their success to their ability to garnie hammers

Only the head of the department Was Usually allowed to recover hammers made in leather Because of the inequality of Inherent Each piece of leather, mechanically speaking.

Graf Petzold and owe much of Their success as a result of Their ability to garnish hammers.

In 1826 Pape introduces the gray felt hat of rabbit fur, painted green poison to ward off the butterflies. The French manufacturers steal his idea and begin to apply felt the same but without the poison .. saying that since the color was different, the patent did not apply.

in 1826 for Pape invents felt hammers made from rabbit fur-made green with a poison to keep moths away. Soon Afterwards French manufacturers steal His idea by making the Same Kind of felt But without the green poison .. HAVING to Avoid to pay royalties to Pape for His patent.



TODAY (1844) felt (gray rabbit in France, white wool in England) had replaced the skin on all the pianos for the many benefits .... etc.4
TODAY (in 1844) felt (in French gray, and white - made of wool - in England According To the writing above) has replaced leather in all european pianos.

Friday, December 3, 2010

Domesticated Fox Ireland For Sale

Faure and Marguerite Long and

Wednesday, December 1, 2010

Peacock Save The Date Wording

Erard Erard Erard


Monday, November 1, 2010

Best Time To Fly To Yellowstone

In the precision casting

I do not post the video of Battiston. Both have seen it all. But this
Public.
And I think the smell of napalm.



I think every country has the politicians it deserves, but also the actors who deserve it.

Tuesday, August 10, 2010

Diabetic Muffins Reciepes

Ravel and His


Ravel played and composed on Erard Pianos.

Schrift Generator Tattoo

Kalkbrenner's Guide-Roller-Mains



Who was Kalkbrenner?


Kalkbrenner was probably the foremost virtuoso in Europe and a prolific composer in the early part of the 1800's.

He also was a successful teacher and part-owner of Pleyel Pianos. He almost convinced Chopin (at least superficially) to take lessons from him, and Chopin dedicated his first concerto to him.

Kalkbrenner devised a method which used a wooden bar to support the forearm so that NO muscular intervention from the arms could intervene in playing.

In fact, the accepted technique at the time of Chopin, Liszt et al concentrated all of the effort and movement on the fingers and hands. Kalkbrenner's Guide-Mains was a simple tool to aid students to focus entirely on the fingers and hands without reverting to the 'crude' arm mechanism.

the effect on the playing is a clearer, more articulated and intelligent interpretation in my opinion. Nevertheless there is a difference in phrasing and overall 'sound' which was preferred at the time.

Unfortunately today's heavy actions make this kind of playing impossible without risk of tendinitis, but at the time, the actions were as light as they could get them because the technique was indeed built on finger-movement.


What you see in the picture is the guide-mains as illustrated in Kalkbrenner's book on technique. He mentions in the print that he sold 31,000 Guide mains in Paris alone as of 1845, which probably means an average of 3,000 a year for a decade!






Thursday, July 8, 2010

No Volume On Ipod Ford

Agraffe - Agraffe low friction.



Above is a shot of the lowest bass-strings on an 1843 Erard. To avoid catching on the windings, Erard invented an Agraffe with rollers. A similar device was used for electric guitars a few years ago.. as usual Erard was ahead of their time.
Sopra una foto delle Agraffe delle corde più basse di This Erard 1843. In order not to get caught on the windings of the string bass Erard has built a roll. Such an invention has been applied to electric guitars years ago. As usual Erard was ahead!

Tuesday, June 29, 2010

South Park Doujinshi Hard

Concert Pitch in Chopin's time-octave in times of Chopin


As you can see by the text Montal (1836), the fork in 1829 ranged from 434 to 438 Hz, while in 1836 ranged from 437 to 441 Hz
As Noted above in a book on tuning period by Montal, concert pitch Was Between 434 and 438 Hz in 1829 and by 1836 It Was Between 437 and 441 ..


Saturday, June 19, 2010

Cover Letters For Trainee Dental Nurse

Lots of Antique Pianos - Pianos old French


I went to visit Olivier Fadini in his workshop in Paris and this is what I found!
1822 Broadwood with true una (due, tre) corda pedal, 1843 Pleyel, 1838 Pianino, 1839 Pleyel Grand, 1832 Pleyel Grand, 1835 Pleyel Grand.. and more were in the room.


Monday, May 24, 2010

Install Manual Honeywell Chronotherm Iv Plus

Soundboards - Soundboards French Pleyel

1844 Pleyel Soundboard. This is the kind of piano Chopin would have played on and composed.
The soundboard is Parallel-strung which gives a clear, articulate voice with not so much bass. There is a Tone-Bar glued-on underneath which makes the soundboard even clearer-sounding and finally a large Cutoff-Bar glued-on underneath (SORRY I LABELED IT INCORRECTLY ON THE PICTURE as stop-bar) Which Basically limits the space of the vibrating soundboard know That the active part of the soundboard is not too big.

Soundboard of a Pleyel of 1844, the same guy who used to play Chopin would compose and ... is stuck in a chain that makes the sound more clear and sharp. In addition, another chain much thicker blocks the vibrations, limiting the area of \u200b\u200bthe vibrating soundboard to get a clear sound even more


A Pleyel Pianino soundboard veneered in rosewood for added strength. Note That the SIZE of the soundboard is Reduced to Avoid excessive bass and Maintain a clear, singing tone. Often played Chopin
These Composed and Pianinos on Them As Well. Also this kind of plan has a tone-bar
This is the soundboard of a Pianino Pleyel, often used by Chopin. As you can see the width of the table is reduced to maintain a clear sound and not have too much bass. The Pleyel also has a longer chain that makes the sound more clear (not loud but clear).


This is the table of a Boisselot of 1846 (used to compose many pieces by Liszt). We note here a chain to make the sound more clear.
This is the soundboard of a Boisselot from 1846, as used by Liszt to compose and play on Occasionally. You can see the tone-bar Which aids in Obtaining a clearer sound.





Here is a picture of the underside of an Erard grand piano to. As you can see the soundboard has a 'chain' (strip glued to the table) along the thick and long jumpers to about 60 cm away.
The reason is simple: applying a thick chain, changes the way you ring the table. The sound thus becomes more clear and defined, limiting the excursion of the bass.
If you consider that the French piano, used by all the composers the 800, PARALLEL was only strings, we realize that the goal was to have a board that sounded especially clearly. Here's

a photo of the bottom of an Erard Grand from the 19° Century. As you can see a 'tone-bar' is glued to the bottom which serves the purpose of voicing the soundboard to obtain a clear sound free of excessive bass-frequencies. If one considers that French Pianos, which were used almost exclusively by the vast majority of 'classical' composers and pianists in the 1800's, were also typically parallel-strung (Erard retained Parallel stringing until the early 1900's) it is evident that the sound-ideal of the times was that of a clear and vocal-sounding piano.






Tuesday, May 11, 2010

Salicylic Acid Cleansers

refinish - Coating Pleyel Pleyel

Prima / Before:
After / After:










Here are some photos of the flap and the front of the Pleyel after being stripped and repolished.




Here are some photos of the Pleyel Has Been after it stripped and repolished










Tuesday, April 20, 2010

Will Pvc Pipes Freeze

Felt with little or no tension


Unlike Most hammer-coverings, be they in leather or felt, this particular 'transition' design of hammer has the external layer of felt which is glued-on all around the surface of the underlying layers. Normally a predetermined degree of tension would be applied to the felt and the felt would be fastened on the sides with no glue on the tip to make sure that the glue does not harden the striking surface.

in this case a very thin layer of what looks like fish-glue is used even under the crown!

There are some restorers who have mentioned that this is not original felt, given the unorthodox nature of both the felt, which is very soft and resilient and more similar to damper-felt than modern hammer-felt. I believe the felt is original, given that a Pleyel which is found in the Which differs only museum of Bologna A Few serial numbers from mine Had Exactly The Same "hammer-types before restoration.


Below is a link Which shows the Hammers before restoration.

http://www.flavio-ponzi.it/Pagine/Articoli.html



These hammers are unusual because they have the outer layer that was applied without applying tension on the felt, as it usually does. Normally, the layers of skin or felt only on the sides are glued and then put live for a good contact with the tip and adjust the brightness of the sound.

This type of hammer work on another principle: the outer layer is applied almost no power and it works like a spring, without having to stretch the felt.

Since there is no tension, the felt is also glued on the tip of the hammer to ensure good contact and then a good interaction between the top layer and the internal ones.

There are certain conservators who is not familiar with that type of hammer they say that is not original. I think it's because the original Pleyel another of the same model, only a few numbers from my series had the same hammer. Is in the museum of Bologna.


if you want to see the hammers of that piano, click on the link above.


Saturday, April 17, 2010

Where To Buy Morton Tender Quick Salt






I finished the cherry frame with a coat of neutral wax and shellac past. The result seems good

Thursday, April 8, 2010

Qcarbo With Eliminex 32 Ounce



Here's an example of the sound difference between the original felt Pleyel, and a white felt of wool of the same density and similar mechanical properties. Felt Pleyel is very difficult to copy because it behaves like a spring although it is very soft.

Here is a video showing the difference in sound Between the original and a modern Pleyel felt wool felt made with similar qualities and mechanical examination with the density. The Pleyel is felt very Difficult to recreate, as it HAD Almost ideal mechanical qualities for this design

Tuesday, March 30, 2010

Uneven Face Slept On One Side




Once stripped, lightly sanded and repolished pad, following the French method, here is a reddish wood grain that is visible again. The handle of brass has been polished and protected with natural resins
After HAVING Stripped, Sanded lightly and the French-polished side of the floor, the grain and Slightly reddish color of the Mahogany is visible once again. The Was polished brass handle with natural resins and protected from oxidization.

Sunday, March 28, 2010

Pulling Abdominals 10 Weeks Pregnancy

restoration

Here is one of the Legs after Being Stripped, Sanded lightly and French-polished

Here's the back leg after being stripped, sandblasted and polished, slightly


Was The Entire leg carved out of a single piece of Cuban mahogany, Including the screw. Unfortunately, this kind of wood is not Suitable for making threaded screws, as it Tends to chip. I Replaced the screws with hand-made screws made of hardwood. Pleyel switched to screw in hardwood, glued-in just like this a couple of years later.

The entire leg was turned from a piece of Cuban mahogany whole. Unfortunately, the Cuban mahogany breaks too easily to make a life like that. I made three wood screws by hand, gluing the screws in the leg. Pleyel began to make her legs the same way a few years later.





More than half of the stems were broken or a timber too hard and inelastic. I changed the rods with the rods made by me with the original wood.
More than half the hammer-shanks Were Either broken or inadequate Replaced with hardwood dowel. I Replaced Them with dowel of the correct type, made here at home.



Friday, February 26, 2010

Gerson Therapy Kevin Trudeau

knives carved cherry frame frame



first carved knives, an old man with an Opinel rifinutura too dark, the second better already finished with linseed oil.
Opinel another in the third pic where I tried to make small rosettes but with little result and a hatchet just yet to finish carving