Unlike Most hammer-coverings, be they in leather or felt, this particular 'transition' design of hammer has the external layer of felt which is glued-on all around the surface of the underlying layers. Normally a predetermined degree of tension would be applied to the felt and the felt would be fastened on the sides with no glue on the tip to make sure that the glue does not harden the striking surface.
in this case a very thin layer of what looks like fish-glue is used even under the crown!
There are some restorers who have mentioned that this is not original felt, given the unorthodox nature of both the felt, which is very soft and resilient and more similar to damper-felt than modern hammer-felt. I believe the felt is original, given that a Pleyel which is found in the Which differs only museum of Bologna A Few serial numbers from mine Had Exactly The Same "hammer-types before restoration.
in this case a very thin layer of what looks like fish-glue is used even under the crown!
There are some restorers who have mentioned that this is not original felt, given the unorthodox nature of both the felt, which is very soft and resilient and more similar to damper-felt than modern hammer-felt. I believe the felt is original, given that a Pleyel which is found in the Which differs only museum of Bologna A Few serial numbers from mine Had Exactly The Same "hammer-types before restoration.
Below is a link Which shows the Hammers before restoration.
http://www.flavio-ponzi.it/Pagine/Articoli.html
http://www.flavio-ponzi.it/Pagine/Articoli.html
These hammers are unusual because they have the outer layer that was applied without applying tension on the felt, as it usually does. Normally, the layers of skin or felt only on the sides are glued and then put live for a good contact with the tip and adjust the brightness of the sound.
This type of hammer work on another principle: the outer layer is applied almost no power and it works like a spring, without having to stretch the felt.
Since there is no tension, the felt is also glued on the tip of the hammer to ensure good contact and then a good interaction between the top layer and the internal ones.
There are certain conservators who is not familiar with that type of hammer they say that is not original. I think it's because the original Pleyel another of the same model, only a few numbers from my series had the same hammer. Is in the museum of Bologna.
if you want to see the hammers of that piano, click on the link above.
0 comments:
Post a Comment