Tuesday, March 30, 2010

Uneven Face Slept On One Side




Once stripped, lightly sanded and repolished pad, following the French method, here is a reddish wood grain that is visible again. The handle of brass has been polished and protected with natural resins
After HAVING Stripped, Sanded lightly and the French-polished side of the floor, the grain and Slightly reddish color of the Mahogany is visible once again. The Was polished brass handle with natural resins and protected from oxidization.

Sunday, March 28, 2010

Pulling Abdominals 10 Weeks Pregnancy

restoration

Here is one of the Legs after Being Stripped, Sanded lightly and French-polished

Here's the back leg after being stripped, sandblasted and polished, slightly


Was The Entire leg carved out of a single piece of Cuban mahogany, Including the screw. Unfortunately, this kind of wood is not Suitable for making threaded screws, as it Tends to chip. I Replaced the screws with hand-made screws made of hardwood. Pleyel switched to screw in hardwood, glued-in just like this a couple of years later.

The entire leg was turned from a piece of Cuban mahogany whole. Unfortunately, the Cuban mahogany breaks too easily to make a life like that. I made three wood screws by hand, gluing the screws in the leg. Pleyel began to make her legs the same way a few years later.





More than half of the stems were broken or a timber too hard and inelastic. I changed the rods with the rods made by me with the original wood.
More than half the hammer-shanks Were Either broken or inadequate Replaced with hardwood dowel. I Replaced Them with dowel of the correct type, made here at home.