Sunday, March 28, 2010

Pulling Abdominals 10 Weeks Pregnancy

restoration

Here is one of the Legs after Being Stripped, Sanded lightly and French-polished

Here's the back leg after being stripped, sandblasted and polished, slightly


Was The Entire leg carved out of a single piece of Cuban mahogany, Including the screw. Unfortunately, this kind of wood is not Suitable for making threaded screws, as it Tends to chip. I Replaced the screws with hand-made screws made of hardwood. Pleyel switched to screw in hardwood, glued-in just like this a couple of years later.

The entire leg was turned from a piece of Cuban mahogany whole. Unfortunately, the Cuban mahogany breaks too easily to make a life like that. I made three wood screws by hand, gluing the screws in the leg. Pleyel began to make her legs the same way a few years later.





More than half of the stems were broken or a timber too hard and inelastic. I changed the rods with the rods made by me with the original wood.
More than half the hammer-shanks Were Either broken or inadequate Replaced with hardwood dowel. I Replaced Them with dowel of the correct type, made here at home.



0 comments:

Post a Comment